The problem of bumps occurrence in deep mines during the long wall mining appears to be one of the most serious one in the design of engineering of mining. The bumps are caused for various reasons, but basically it is an aftermath of the accumulated energy, which is released under some unfavorable conditions. In this paper the influence of given dislocations and their slope in a coal seam are studied based. The numerical tool is the free hexagon method. This method belongs to a set of discrete element methods and enables us to define and calculate stresses in a natural way along the interfacial boundaries of adjacent particles (elements). Since the bumps are affected by a possible slip along the dislocations, dynamical response has to be taken into account. The velocity of excavation of the mine is considered by successive change of values of Eshelby’s forces on the face of the wall., Petr Pavel Procházka, Jiřina Trčková and Tat Seng Lok., and Obsahuje bibliografii
Surface deformation due to underground exploitation affects the safety of overlying structures. Forecasting can predict risks to surface structures and facilitates actions designed to improve their resilience and reduce the potential impact of mining activities. However, forecasting accuracy is limited. Therefore, in practice, model parameters are determined within a certain margin to ensure that critical values of deformation indicators for surface objects are not exceeded. For economic reasons, it is important to minimize these margins while also ensuring that safety is maintained. One important factor influencing forecasting accuracy is the uncertainty in deformation model parameters used for calculations. Therefore, it is critical to adopt an appropriate methodology for determining and addressing the uncertainties in deformation model parameters used in forecasting. This study presents methods for estimating the Knothe's model parameters needed to forecast surface deformation caused by underground mining and defining the uncertainties in those forecasts. Depending on the parameter uncertainties, one of two methods for propagation is proposed: the Monte Carlo method or the law of propagation of uncertainty. Using this approach, it is possible to account for uncertainty and reduce forecast margins. A case study of hard coal mining in the Upper Silesian Coal Basin region of Poland is presented., Wojciech Gruszczyński, Zygmunt Niedojadło and Dawid Mrocheń., and Obsahuje bibliografii
The influence of particle shape (aspect ratio) on the intrinsic viscosity is investigated, taking three Czech kaolin products (floated kaolins) as paradigmatic examples. An average aspect ratio is obtained for each kaolin from a comparison of particle size measurements using sedimentation and laser diffraction. The intrinsic viscosity is obtained by a multistep procedure: firstly, flow curves are recorded for each kaolin with the optimum deflocculant concentration, secondly, the (apparent) relative viscosities read off from the flow curves are plotted against the kaolin volume fraction and, thirdly, these data are fitted using the Krieger relation to obtain the intrinsic viscosity in the asymptotic dilute limit. It is shown that the data determined with the method proposed are within the Jeffery and Brenner bounds and that an average aspect ratio of about 20 (17-22) results in an intrinsic viscosity of about 10 (7-13), compared to 2.5 for spherical particles. Although currently th e measurement precision is not suffi cient to seriously assess the influence of Brownian motion, the method can principally be used to predict the intrinsic viscosity when the average aspect ratio of the system (and its particle size distribution) is known, and vice versa., Eva Gregorová, Willi Pabst and Jean-Baptiste Bouchet., and Obsahuje bibliografické odkazy
The vault in Vladislav Hall is a structural masterpiece of great historical value. Its structural analysis revealed that the permanent load exerted by its self weight is uniformly transmitted into the vaults and ribs without any potential crack appearance. The topical issue, however, is its response to temperature changes with respect to actual effects. Computations show that temperature changes may cause problems., Petr Fajman, Jiří Máca and Pavel Beran., and Obsahuje bibliografii
For investigation of influence of various subsoil geological structures on spectral acceleration amplitudes of foundation soil it is necessary to continue in long time monitoring of near seismic events by using of large number of field accelerometers. The new special apparatus for automatic recording of spectral acceleration response was constructed. Principle of this apparatus is reverse pendulum with piezoelectric converter. This simple construction makes possible production numerous series with small requirements on capital expenditure and installation. The function of developed apparatus prototype was field-tested in station Prague - Květnice. Various seismic signals were recorded and also response amplitude of earthquake with focus near Červený Kostelec (10 October 2005, 10 : 51 : 57.4 ; M = 3.4; R = 156 km; φ = 50.47; λ = 16.07)., Jiří Buben and Vladimír Rudajev., and Obsahuje bibliografii
We introduce an interactive seismic viewer "OP" (developed in MATLAB platform), primary designated for detailed processing of selected events. Few examples of graphical outlook are presented (main display window, particle motion diagram, etc.), available tools are briefly described, uncommon special tools (simultaneous display of original and filtered signal or time-spatial correlation of seismogram components) are emphasized. Features of the viewer are discussed, some programming solutions are also mentioned., Petr Kolář., and Obsahuje bibliografii
The results presented in this paper concern investigation of environmental influences to GNNS coordinates on the example of ASG-EUPOS network. The problem of the impact of environmental effects is crucial for observing gravity. Satellite systems are not as susceptible to changes in local hydrology or atmospheric effects, although significant influences are clearly visible in the change of coordinates. The authors analyzed daily and sub-daily solutions (geocentric coordinates) in the context of different disturbances to eliminate sites suffering from poor quality for further researches (e.g. data from the most reliable ASG-EUPOS stations will be used for investigating the correlation of their movements with the lithosphere deformations on territory of Poland). There are many doubts regarding proper antennas’ placement - as they are mostly placed on the roofs, there were questions if data from these sites can be used for scientific purposes like velocity estimations or geodynamical researches. Analysis of daily solutions was supposed to prove that the majority of Polish sites give fully valuable data. Some factors that may cause a precision decreasing can be avoided or eliminated in the future. Taking into consideration that GLONASS will be soon fully operational and it will be an alternative for commonly used GPS, the authors made separate elaboration of GPS and GLONASS data. Usage of two different satellite systems holds the potential to increase of solutions’ reliability and eliminate errors that could be possibly related to the specific satellite system. Base on time series of coordinates residual values, systematic errors that could prove geophysical and geodynamical influence on GNSS measurements were investigated. In this elaboration only post-processing observations were taken into account, but the monitoring of the network in the near real-time by means of coordinates’ stability is under development., Janusz Bogusz, Mariusz Figurski, Krzysztof Kroszczyński and Karolina Szafranek., and Obsahuje bibliografii
The GRID_STRAIN software that runs under the MATLAB® environment helped us in achieving the continuous strain field model. Unfortunately, the program averages the results. Therefore, the authors’ main goal of this paper was to work out a method of good verification of data to avoid falsifying of the results of strain calculations. We decided to use the method of the Delaunay triangulation to build a set of triangles of the data (EPN and ASG-EUPOS stations as the vertexes) and by the use of the velocities of each point and their errors, to estimate the single strain in each triangle. This approach made it possible to exclude the outlying values from the data. Selection of the criteria of the characteristic of insufficiently stable points in order to remove them from further computations is of a great importance for the final results of computations of the deformation field. In such a tectonically stable region, as the area of Poland, the strain values should not be higher than 3 to 4 nanostrains/year. At the low rate of tectonic deformations observed in Poland, the disturbances resulting from insufficient stabilization of the ASG-EUPOS network influence the computations of the deformation field to a significant extent. Improper stabilization of a single permanent station causes unification of the deformation field within 2 to 3 computation triangles having a common vertex at this station. Based on this assumption, nearly 30 of the ASG-EUPOS stations were excluded from further strain calculations. The analysis of the geodynamic consistency of the deformation field for the computation triangles is basis for indicating stations for which the dislocation resulting from insufficient stabilization, significantly exceeds the dislocation resulting from the deformation of the lithosphere. Most of the ASG-EUPOS network stations may be used for analysis of local differentiation of the deformation field in Poland., The regularities of the deformations distribution determined by ASG-EUPOS network stations constitute a new set of data which will be used for further geodynamic interpretation. In case of lower rank disturbances resulting from destabilization of the network stations, this factor’s component cannot be recognized using qualitative analysis of the deformation field., Janusz Bogusz, Anna Klos, Mariusz Figurski, Marek Jarosinski and Bernard Kontny., and Obsahuje bibliografii
This paper concerns an analysis of accuracy of estimated parameters ( ω, Λ, Φ) which define the tectonic plate motions. The study is based on the velocities of station positions published by ITRF2000 for (Satellite Laser Ranging) SLR and (Global Positioning System) GPS technique, separately. The Eurasian, North-American, Australian and Pacific plates were analysed. Influence of the number and localization of stations on estimation accuracy of the tectonic plate motions for SLR and GPS technique were analysed. The discrepancies were discussed., Katarzyna Kraszewska and Miłosława Rutkowska., and Obsahuje bibliografické odkazy
The paper concerns analysis of solutions obtained during common processing of data from GNSS permanent stations situated on mountainous terrain: the Western Carpathians, the Sudetes Mountains and adjacent areas. As the outcome daily and weekly solutions (ellipsoidal coordinates) of forty Polish, Czech, Slovak, Ukrainian and German sites were obtained. Weekly solutions were used to determine velocity field and vertical movements, daily solutions enabled quality and precision of sites’ coordinates estimation to check if permanent GNSS sites can be used as a stable reference frame for geodetic, geological and geodynamical measurements in the mountainous area. First investigations concerning data from permanent GNSS stations in the Sudetes Mountains were made in 2007 using daily solutions from EPN sites obtained in test reprocessing of the whole regional network performed in Centre of Applied Geomatics. Since that time, national systems became operational increasing density of GNSS network, so the data can be used for wider range of investigations. As the majority of examined stations started to gather data in 2008, analysis were based on relatively short observation period, so they rather play a role of tests for further investigations and they give the preliminary estimation of individual sites’ activity., Mariusz Figurski, Karolina Szafranek, Janusz Bogusz and Paweł Kamiński., and Obsahuje bibliografii