Based on experimental studies using the “integral velocity index of the vertical displacement of the territory” and criterion of generalized seismicity, a close functional relationship was found between two parameters of different physical nature: seismic activity and altitude displacements of the Earth’s surface in Europe. The mathematical correlation between the generalized parameters of the velocity altitude displacements on the territory and seismic activity is established according to seismic and GNSS stations for the period from 2000-2011 for the areas in Europe with close correlation between seismicity and velocity of vertical movements of the Earth’s surface. and Tretyak Kornyliy, Romaniuk Volodymyr.
In the near future, hydrogen will become an important fuel which may be able to resolve local problems connected with air quality. Hydrogen-propelled transport means are being developed and are already used in the automobile industry. Since the combustion of hydrogen does not produce any emissions of carbon oxides but only water, hydrogen is considered as a key fuel of the future. Hydrogen is abundantly present all over space and can be obtained from a number of resources, be they renewable or non-renewable. Global production has so far been dominated by hydrogen production from fossil fuels, with the most significant contemporary technologies being the reforming of hydrocarbons, pyrolysis and co-pyrolysis. Plasma cracking is still in the developmental stage. The preferred method of hydrogen production on an industrial scale is steam reforming of natural gas for its low operational and production costs. When the operational costs of steam reforming and partial oxidation are compared, partial oxidation seems to be a more acceptable process, but the subsequent shift makes this process more expensive. Pyrolysis processes have acceptable investment costs and besides the production of hydrogen also satisfactory yields of oils. Two-stage co-pyrolysis is suitable considering its acquisition of a high amount of hydrogen from mixed charges. It is apparent that the co-pyrolysis of organic materials with coals is a process for hydrogen production capable of competing. It can therefore play a significant role in the future., Olga Bičáková and Pavel Straka., and Obsahuje bibliografii
To verify possibilities of the thermic sinking technology the experiments with magmatic rocks (muscovite-biotite granite, amphibole-pyroxene andesite, pyroxene basalt) were made in the preliminary research phase. The contribution presents the microscopic study results of petrographic and structural observations of the rocks after their thermic reworking. Mainly distribution of melted rocks in the form of glass, forming of brittle deformations (fractures) on the level of mineral and rock, and penetration of melt into fissures were observed., Roman Farkašovský and Michal Zacharov., and Obsahuje bibliografii
This paper presents the relation between main crack systems and physical properties of carbonate rocks. The existence of cracks in a rock mass causes the reduction of seismic wave velocity, which is smaller in direction perpendicular to a crack plane than in direction parallel to it. This affects the occurrence of the anisotropy of seismic wave velocity, which is characteristic for rocks with preferred orientation of cracks. The existence of relationship between crack and seismic anisotropy allowed to use geophysical methods for determination of fracture density and orientation of crack systems. The research area is located in the south-east part of the Upper Silesian Trough. Tectonic observation and geophysical measurements was carried on the carbonate sequence on the both fold limbs building the Chrzanow-Wilkoszyn Syncline, originated during the Early Cimmerian movements, in the Upper Triassic - Middle Jurassic period. It was measured seismic waves velocity in the surface layers of rock mass and the strike azimuth and dip angle of cracks.The seismic anisotropy of the rock mass was done along radial profiles having common central point using P.A.S.I. Seis mograph (Mod.16S24-N). Results of field measurements were interpreted to estimate components of crack and velocity tensors. Obtained outcomes allowed to compare the existing main crack systems on the both fold limbs with seismic measurements. Eventually we have shown that seismic measurements are useful tool to study the cracks anisotropy in rocks inaccessible for direct observations., Iwona Stan-Kleczek, Katarzyna Sutkowska, Dominika Stan and Mikołaj Zolich., and Obsahuje bibliografické odkazy
We analysed a nearly 133-km-long portion of the Sudetic Marginal Fault (SMF) in Poland (99.7 km) and the Czech Republic (33.8 km), comprised between Złotoryja in the NW and Jesenik in the SE. The fault trace has been subdivided into fifteen segments showing different orientation (N29°W to N56°W, and even N111°W SE of Złoty Stok), geological setting, length (8.8-22.9 km in Poland and 1.4-7.5 km in the Czech Republic), and height of the fault- and fault-line scarps (5-75 m to 200-360 m). Orientation of the entire fault trace approaches N41° W, and the mountain front sinuosity amounts to 1.051. Individual fault segments bear a flight of two to five tiers of triangular facets, showing differentiated state of preservation and degree of erosional remodelling. The highest triangular facets are confined to Rychlebské (Złote) and Sowie Mts. This tiering points to at least five episodes of uplift of the SMF footwall, starting shortly after 31 Ma, i.e. after basalts of the Sichów Hills area were displaced by the fault, and most probably postdating 7-5 Ma time interval, during which rapid cooling and exhumation of the Sowie Góry Mts. massif took place. Morphometric parameters of 244 small catchment areas of streams that dissect the fault scarp include, i.a. elongation, relief, and average slope of individual catchment areas, together with values of the valley flo or width to valley height ratios. These figures point to moderate tectonic activity of the SMF and allow us to conclude about Quaternary uplift, particularly important in the Sowie and Rychlebské (Złote) segments., Janusz Badura, Witold Zuchiewicz, Petra Štěpančiková, Bogusław Przybylski, Bernard Kontny and Stefan Cacoń., and Obsahuje bibliografické odkazy
The article presents a separator whose magnetic circuit is comprised of large blocks from permanent NdFeB magnets and the knowledge gained from its assembly. In the separation zone of this separator, significantly higher values of magnetic induction were reached in comparison with a similar circuit with ferrite magnets. The results of the long-term comparative technological tests are provided of this separator when used in an industrial plant for the separation of undesirable ferromagnetic admixtures and objects (tramp iron) from raw materials for tile production. Throughout these tests, the fundamental influence of the value of magnetic induction in the separation zone on the amount of the captured magnetic fraction was confirmed and high efficiency of the new separator proven., Václav Žežulka and Pavel Straka., and Obsahuje bibliografii
For companies doing business in mining mineral deposits, ensuring safe work is one of the key tasks (Safety First!). One of the important trends in this area is prevention and endeavour to forestall risk situations. Risks need to be searched, technically described, spatially defined, evaluated and categorized by degree of risk. Complex geological and stability conditions can be one of the sources of persistent and significant risks, which are mainly landslides and rockslides threatening both mining equipment and employees. The problem described in this article and its solution concerns the Most Basin (formerly the North Bohemian Lignite Basin). This is a tertiary basin that was founded in the Oligocene. The main mineral is lignite and mining takes place on the surface. The main excavating machinery in the surface lignite quarries in Europe (Czech Republic, Germany, Poland) is the bucket wheel excavator., Roman Kapica, Dana Vrublová and Martin Vrubel., and Obsahuje bibliografii
This paper presents the results of investigations on changes of the parameters of coal and surrounding rocks in the fault zones in the Upper Silesia Coal Basin. It has been shown that these zones, in relation to the undisturbed coal seams, reveal a n enrichment with some substances that pose a threat to the natural environment and that they also show a deterioration in the strength parameter values of rocks which threaten the safety of the operation. The greatest threat for the environment constituted sulphur and the ash. In the zone of the fault, it wa s observed that sulphur behaved in two ways. In the first case, the total sulphur and pyritic sulphur increased significantly by 192.3 and 823.5 %, respectively, and a small quantity of sulphate sulphur was found here, whereas in the other case, the total sulphur and pyritic sulphur decreased by 31.6 an d 35.3 %, respectively, and sulp hate sulphur increased considerably and reached up to 600 %. The mean content of ash increased by 171.8 %. The mechanical strenght of the rocks under uniaxial compressive strength in the fault zones decreased by 67 %, the microhardness of coal decreased to zero, and the intensity of cracks in coal grains increased by 359.1 %., Stanisław Roman Cmiel., and Obsahuje bibliografické odkazy
The importance of GIS detailed data for geomorphostructural study is discussed. This paper is a case study in the area of Inowrocław (central Poland). This small area is a place being a concentration of geological processes and its relief depicted by a number of height points (with determined elevations of satisfying accuracy required in the analysis) demonstrates their effects. The invented approach is based on a numerical analysis of actual and theoretical relief surfaces. Considering the area type this study involves a high resolution model of the relief. There are specified examples of correlation between morphological features and tectonic structures. The presented results prove a role of structural elements (faults) in development of geomorphostructural features and a tectonic mobility as a significant factor forming the area relief., Zbigniew Szczerbowski., and Obsahuje bibliografii
This paper describes a prototype of the authors own design used to measure the relative inclinations of engineering objects and inanimate nature phenomena. A set of measurements can be used to determine ground surface deformation caused by mining activities or due to influences of hydro-geological, geotechnical or construction. The instrument was built with elements of the optoelectronic technique. Fiber optic, CCD camera and semiconductor laser are the basic building blocks of the device. The elaborated device runs on a Central Registration and Data Processing (CRP D) System. The deflection of freely suspended fiber are recorded by a CCD camera and next are transmitted to an external recorder (eg. notebook). Natural light or laser light was introduced into the fiber. The length of the fiber and the optical construction affects the measuring range of the device. The accuracy of instruments depends on: method of fiber suspension, method of fiber attenuation fluctuations, resolution CCD camera and identification method of the image laser spot recorded. Experiments have shown that the built prototype device is able to obtain a submillimetre accuracy., Kazimierz Ćmielewski, Janusz Kuchmister, Piotr Gołuch and Krzysztof Kowalski., and Obsahuje bibliografické odkazy