A method for estimation of elastic wave velocity anisotropy based on ultrasonic sounding data during rock-sample loading was developed. The subject matter of the method is approximation of ultrasonic sounding data by triaxial velocity ellipsoid. The applicability of proposed method was verified on investigation of anisot ropic rock samples. Laboratory loading of migmatite samples was realized under various mutual orientations between acting force direction and rock foliation - perpendicular, parallel and under 45°. P-ve velocity of ultrasound waves was monitored by 8 sensors network. The velocity ellipsoid was computed and changes of sizes and waorientation its main axes during loading were analyzed for separate experiments with regard to loading level. It was found, that independently to mutual orientation between rock foliation and loading direction, the minimum velocity vector turns to perpendicular direction to final rupture plane and maximum velocity vector turns to the plane of final rupture., Matěj Petružálek, Jan Vilhelm, Tomáš Lokajíček and Vladimír Rudajev., and Obsahuje bibliografické odkazy
The gob side entry retaining with high water material is often used in coal mines. To study the stress evolution characteristics of surrounding rock and asymmetric support control technology of gob side entry retaining with high water material, the evolution law of stress and deformation of surrounding rock in gob side entry retaining during working face mining is studied by theoretical analysis, numerical simulation and field measurement. According to the stress variation of overlying strata during the mining process of the working face, the mechanical models before and after the basic roof fracture were established respectively. The stress and deformation of the filling body and the roof on the side of the filling body are larger, and the stress and deformation of the solid coal and the roof on the side of solid coal are smaller. The maximum stress is at 3 m away from the roadway. The first weighting step distance is 40 m and the periodic weighting step distance is 30 m. Based on the stress and deformation characteristics of the roadway surrounding, the roadway surrounding support is divided into filling bodyside, solid coal side, and middle part of roadway roof. The asymmetric support technology of "filling body+ double row hydraulic prop+ I-beam+ high-strength pretension anchor cable+ high-strength bolt" is proposed. The field engineering practice shows that the surrounding rock control effect of asymmetric support technology with high water material is good., Qiyuan Shan, Yongli Liu, Tao Li and Zhupeng Jin., and Obsahuje bibliografii
The astrogeodetic method of detailed geoid determination need astronomical observations of longitude and latitude. Together with GPS observations it may be used to vertical deflections determination. In the article the portable system for automatic determination of astrogeodetic vertical deflection components developed at AGH University of Science and Technology is described. The design, main error sources, and preliminary results of the test measurements are presented., Jacek Kudrys., and Obsahuje bibliografii
The known vertical deflection values can be utilised to increase geoid’s accuracy. One of the methods of vertical deflection components (ξ, η) determination is to compare astronomic and geodetic coordinates. Presently it is easy possible to obtain geodetic coordinates with high accuracy from GPS observation. In the article the methods of astronomical CCD observation with aid of two different optical systems are discussed. Project realisation is in preliminary stage and there are no results available yet., Jacek Kudrys., and Obsahuje bibliografické odkazy
An occurrence of tetra-coordinated aluminum in altered coal and low temperature coal ashes was investigated. As altered coal a sample from the Lazy mine (Upper Silesian Coal Basin) was tested, further, low-temperature ashes from different coals were prepared and measured. During preparation the selected coal samples were intensively air-oxidized; 27Al MAS NMR spectra of obtained ashes were then acquired and compared against those for initial coals. A reference wood ash and Al standards were used for identification of Al-forms. It was found that chemical shift at 4 ppm with coals corresponds to that for triaquo-hydroxo-diphenoxido-aluminum(III) complex (THDA), further, the shift at 72 ppm with altered coal and resulting ashes agrees with that for Al tetra-coordinated with oxygen. So, in the presence of coal organics the tetra-coordinated Al is formed under low temperature conditions, because during low temperature ashing the THDA complex is transformed to Al tetra-coordinated with oxygen only at 350 °C. A similar process occurred in the case of oxidation of coal substance under low temperature conditions in the nature at temperatures below 150 °C., Pavel Straka., and Obsahuje bibliografii
The parameters determine waves energy in shallow water zone that pronounces the crucial influence on abrasion of both natural and artificially paved banks. The effort to re-development of the relations was found as absolutely necessary for waves energy calculations. Substantial benefit of the work is found not only in enabling the use of computers while avoiding time-consuming and difficult application of diagrams, but namely in recent recognition that the calculation results showed a risk of underestimate the real impact of wind-induced waves. In some cases, the calculations respecting the above standard produce lower values of waves height and time-period and thus also lower values of wave energy., Tamara Spanilá and Karel Jahoda., and Obsahuje bibliografické odkazy
This paper reports the possibilities of using FTIR spectroscopy and simultaneous thermogravimetry and differential thermal analysis for examination of the structural order of four Czech kaolinite samples (Jimlikov, Sedlec, Olomucany and Unanov deposits) and one kaolinite standard KGa-1b from Georgia deposit obtained from the Source Clays Repository of The Clay Minerals Society (USA). FTIR spectroscopy was used for the classification of the degree of structural order of kaolinite samples by empirical (IR-E) and numerical (IR-N) classification. Differential thermal analysis was used for the determination of the kaolinite disorder degree according to decomposition peak temperature obtained from DTA curves. The resulting trend of decrease in orderliness is: KGA-1b (with the best orderliness) > Jimlikov > Sedlec > Olomucany > Unanov (with the worst orderliness)., Lenka Vaculíková, Eva Plevová, Silvie Vallová and Ivan Koutník., and Obsahuje bibliografii
The character of soil cover in anthropogenically affected areas was determined on the basis of soil morphology, particle size distribution, soil chemical properties, soil organic matter properties and mineralogy of clay fraction. The degree of anthropogenic influence was variable in the individual soil profiles. This is probably the first time that data on hot-wate rextractable carbon distribution in soil profile were obtained from the territory of Prague., Anna Žigová, Martin Šťastný, Jana Krejčová and Pavel Hájek., and Obsahuje bibliografické odkazy
Diatomite is a siliceous sedimentary rock, and it can be used in many industrial applications due to its high porosity, low density porous and permeable structure, chemical resistance, high purity, high specific surface area, absorptive capacity and to its absorbent properties. The best known Portuguese occurrences of diatomite are located in the regions of Óbidos and Rio Maior. The purpose of this research is to characterize the Rio Maior and Amieira diatomite and beneficiate this rock to be used in some potential applications locally or not. The studied diatomites present a fine texture; chemically the samples have a high SiO2 content, the principal minerlas are quartz and amorphous opal. The studied diatomites benefited with temperature and addition of NaCl (acting as accelerator of the crystallization process), with 5 % of NaCl being reduced the transformation temperature of the amorphous opal in opal C / CT at about 200 ºC. The diatomites from Rio Maior and Amieira in natural state has an enormous potential as absorbent, of heavy metals (e.g. in soil contamination) or dyes (textile industry). These diatomites after beneficiation can be used in construction materials (as additive), being more reactive and crystalline than in the natural state, diatomites can be promoters of mechanical resistance in mortars and geopolymers. and Costa Cristiana, Velosa Ana, Cerqueira Angela, Caetano Paulo, Rocha Fernando.