The future of the global and local geodynamic researches belongs to permanent monitoring. The conception of the semipermanent GPS observations’ application in geodynamic research in Sudetes area is presented in this paper. The conception is based on spatial modeling of the disturbing phenomena in the coordinate time series of (semi) permanent stations. The local interplate movements and their correlation with major European tectonic structures are determined on the strength of coordinate time series of these stations. The problem of epoch integration with semipermanent and permanent (EPN/IGS) observations for local geodynamic monitoring is also investigated., Bernard Kontny, Jarosław Bosy and Andrzej Borkowski., and Obsahuje bibliografii
The article discusses techniques for interpreting satellite images, which are capable of detecting and monitoring landslip zones, and presents a research plan for the study of landslips with the use of satellite interferometry. The exceptionally longlasting and heavy rainfall that occurred in 1997 initiated more than 20,000 landslips within the Polish Carpathians. These landslips continue to pose a threat. Some of them move almost imperceptibly - slowly but continually - yet long-lasting periods of heavy rainfall can lead to catastrophe. The price can be human lives, as well as losses into the millions connected with the devastation of technical infrastructures and entire housing estates. The sheer number of landslips that occur in the Polish Carpathians makes the traditional ways of researching them insufficient. Satellite remote sensing allows capturing a large area of interest on a single photo. Many various satellites photograph the surface of the Earth using different techniques, allowing for the selection of the best-suited image type for a given application. Synthetic Aperture Radar (SAR) images are utilized in landslip studies. The images may be interpreted using the InSAR and/or PSInSAR techniques. Both methods are capable of detecting landslip zones and monitoring them in order to assess the risk of a sudden landslide. Information of this type is significant to local authorities when planning the activities necessary to protect the safety of inhabitants and the local technical infrastructure., Katarzyna Mirek., and Obsahuje bibliografii
We apply a traditional method of surface wave tomography as a new approach to investigate the uppermost crust velocities in the Western Bohemia region (Czech Republic). It enables us to look for velocity distribution in a small scale of tens of kilometers. We measure Rayleigh wave group velocity dispersion curves in a period range 0.25 - 2.0 s along paths crossing the region of interest. We use modified multiple-filtering method for frequency-time analysis. We compute 2-D tomography maps of group velocity distribution in the region for eight selected periods using the standard methods and programs described in literature. We discuss the velocity distribution with respect to results of former study by Nehybka and Skácelová (1997). We present a set of local dispersion curves which may be further inverted to obtain a 3-D shear wave velocity image of the area., Petr Kolínský and Johana Brokešová., and Obsahuje bibliografické odkazy
The thermal resistance is one of the important behaviors of the construction and thermal insulating materials. This study describes foamed material made from fluidized bed ash (FBA) in combination with natural smectite having a filler function. The foaming effect was insured by addition of metallic aluminum to the FBA/smectite mixture. Highly calcareous FBA containing calcium oxide creates during slaking processes an alkali reaction and with aluminum develops foaming agent - hydrogen. Study of thermal resistance was a part of experiments directed on heat insulating materials and article presents test results of this life gardening material. Specific attention was focused on differences between the results of chemical analyses and the crystal phases identified by X-ray diffractions. The paper presents hypothesis of chained alumina-silicates acting as bonding agent confirmed by infra-red spectroscopy and assuring together with calcium sulfates high thermal resistance even under condition of direct flame attack., Tomáš Hanzlíček and Ivana Perná., and Obsahuje bibliografii
The impact of blasting operations is accompanied by both positive and negative after-effects. Vibrations, activated by explosion, help to disintegrate the rocks representing a positive effect on one hand and a negative effect on the other and they endanger the surrounding buildings and other properties. If the vibrations are large enough, then the ambient objects could be damaged or destroyed. The negative effects depend on their range and strength. Vibration intensity of seismic waves is generally proportional to the weight of the explosive used. Recently, negative effects of the blasting operations and quantification of the seismic safety have been highly actual and stand for a challenging problem. The article highlights the results of the blasting operation monitoring in some quarry in Slovakia., Julián Kondela and Blažej Pandula., and Obsahuje bibliografické odkazy
An assemblage of Al-low titanite and ilmenite is present in Ti-rich microgranodiorites intruded in the Moldanubian Zone of the Bohemian Massif. Titanite is characterized by coupled substitution (Al, Fe3+) + (F, OH) ⇔ Ti +O, with a slight excess of (Al, Fe3+)-OH component over of (Al, Fe3+)-F component. Ilmenites have FeTiO3 amount between 86 and 95 mol. % and are partly enriched in the MnTiO3 (pyrophanite) component (4-10 mol. %). The relatively low content of MnTiO3 component in ilmenite, together with absence of magnetite suggests that first crystallization phase of microgranodiorites connected with origin of ilmenite started in conditions of low fO2. However, titanite together with ferroactinolite originated in late-magmatic stage most likely due to hydration reaction such as clinopyroxene + ilmenite + quartz + H2O = titanite + amphibole during some increasing of fO2 and fH2O., Miloš René., and Obsahuje bibliografii
Titanium-rich biotite from granodiorite belonging to redwitzite suite of the Slavkovský les Mts. alters to mixture of low-Al titanite, Mn-enriched ilmenite, REE-fluorocarbonate (parisite) and very fine-grained mixture of chlorite and clay minerals. Titanite consists from 1.1 to 2.3 wt. % Al2O3 and from 0.4 to 1.0 wt. % Fe2O3. Titanite shows some Al+Fe3+ excess over F with significant amount of (Al+Fe3+)-OH titanite component (4-9 mol. %). Ilmenite contains considerable amount of pyrophanite component (5-8 mol. %). The retrograde assemblage of titanite with considerable amount of (Al+Fe3+)-OH titanite component and presence of ilmenite, together with chlorite, argued for low-temperature breakdown of biotite in reducing conditions., Miloš René., and Obsahuje bibliografii
An assemblage of Al-bearing titanite, ilmenite and magnetite is present in polymetamorphic metabasite environment of the Varied group of the Moldanubian Zone. Titanite is characterized by coupled substitution (Al, Fe3+)+ (F, OH) - Ti + O, with a slight excess of (Al, Fe3+)-F component. Complex reaction rims of titanite around ilmenite occur in some cases. Ilmenites have FeTiO3 amounts usually above 96 mol.%, with some enrichment by MnTiO3 component (max. 8 mol.%). Magnetite has a negligible ulvöspinel component (max. 1 mol.%)., Miloš René., and Obsahuje bibliografii
In this article we solve the non-standard situation that arose after publishing our paper "Crustal deformations in the epicentral area of the West Bohemia 2008 earthquake swarm in central Europe" (Schenk et al., 2012). Horálek and Fischer wrote a statement regarding our publication, sent it to specialists interested in research in the West Bohemia swarm area, and questioned the reliability of the seismic data used in our work. Since the statement regarding the reliability of our work was not directly sent to us we are using this journal to return to professional discussion regarding our results. In this paper we review scientific arguments made in their statement and provide review of various studies on West Bohemia tectonics and related seismicity., Vladimír Schenk and Zdeňka Schenková., and Obsahuje bibliografii
A study of displacements relating to geodynamical processes involves a use of accurate measurement equipment. Better and better accuracy of field surveys neglecting a survey environment can be insufficient in a reliable study. One of the environmental aspects is discussed in the paper. That is a geotechnical condition of a ground - an environment of benchmarks, which changes of position are observed in geodetic surveys. The conditions determine a ground stability affected by weather or geological processes. The main idea of the paper is to consider geotechnical and geological aspects in geodetic reasoning carried on the base of displacement analysis within a study of geodynamics. There are presented examples illustrating the problem. The first relates to former levelling observations carried in an area of Wieliczka, well geologically surveyed due to mining activity in a salt deposit. There are presented results obtained on the base of a numerical analysis. The seasonal variations of benchmarks’ heights are explained in a background of geology. The changes of ground properties induced by atmospheric conditions are suggested as the main cause of the displacements. The survey data processing provided values of displacements caused by seasonally expanding grounds. The second examples concerns ongoing observations in the area of Inowroclaw (located above the salt dome) bring similar variations of heights that can not be related to that cause. The estimated linear trend of height changes proves an uplift process of the salt dome. Derived conclusions suggest a certain methodology helpful in reliable analysis of geodetic surveys. The conclusions prove that geodetic surveys carried out for investigations of displacements in geodynamics require quite extensive geological data., Zbigniew Szczerbowski., and Obsahuje bibliografii