The paper deals with the effect of the parameters of aqueous slurries of particulate matter on the functional relationship between the specific energy and the flow rate of hydrodynamic dredge pumps. The empirical conversion equations available from literature are reviewed. The methods of converting the pump characteristics at clear water to those which apply for slurries have been incorporated into a straightforward, user-friendly computer program which can be run on a PC. The program may be adopted in the design of hydro-transportation systems involving hydrodynamic dredge pumps. The program computes the specific pump energy as a function of flow rate at given rotary speed, for specific operating conditions of the pump, i.e., for specific parameters of the slurry.The paper deals with the effect of the parameters of aqueous slurries of particulate matter on the functional relationship between the specific energy and the flow rate of hydrodynamic dredge pumps. The empirical conversion equations available from literature are reviewed. The methods of converting the pump characteristics at clear water to those which apply for slurries have been incorporated into a straightforward, user-friendly computer program which can be run on a PC. The program may be adopted in the design of hydro-transportation systems involving hydrodynamic dredge pumps. The program computes the specific pump energy as a function of flow rate at given rotary speed, for specific operating conditions of the pump, i.e., for specific parameters of the slurry. and Článek pojednává o vlivu parametrů hydrosměsi písku na funkční vztah měrná energie - průtok hydrodynamických bagrovacích čerpadel. Uvádí přehled empirických přepočtových vztahů v dostupných literárních podkladech. Metody přepočtu charakteristik čerpadla z čisté vody na hydrosměs byly zapracovány do uživatelsky jednoduchého výpočtového programu pro osobní počítač. Program lze využít při návrhu hydrodopravních systémů s hydrodynamickými bagrovacími čerpadly. Výstupem programu jsou závislosti měrné energie čerpadla na průtoku při daných otáčkách pro konkrétní podmínky provozu čerpadla, resp. pro konkrétní parametry suspenze.
The aim of the study was to assess the possibility of using the empirical formulas to determine the roughness coefficient in gravel-bed streams, the bed slopes of which range from 0.006 to 0.047. Another aim was to determine the impact of taking into account the conditions of non-uniform flow on the application of these formulas and to develop the correlation relationships between the roughness coefficient and water surface slope and also between the roughness coefficient and friction slope in order to estimate the roughness coefficient n in gravel-bed streams. The studies were conducted in eight measuring sections of streams located in the Kraków-Częstochowa Upland, southern Poland. The roughness coefficient n0 for these sections was calculated from the transformed Bernoulli equation based on the results of surveys and hydrometric measurements. The values of n0 were compared with the calculation results obtained from fourteen empirical formulas presenting the roughness coefficient as a function of slope. The Lacey, Riggs, Bray and Sauer formulas were found to provide an approximate estimate of the n value, while the best roughness coefficient estimation results were obtained using the Riggs formula. It was also found that taking into account the non-uniform flow and using the friction slope in the formulas instead of the bed slope or water surface slope did not improve the estimated values of the roughness coefficient using the tested formulas. It was shown that the lack of differences in the RMSE and MAE error values calculated for the developed correlation equations between the roughness coefficient and the friction slope or with the water surface slope also indicate no influence of the assumed friction slope or water surface slope on the value of the estimated roughness coefficient.
This study presents the results of 32 laboratory experiments on local scour at a single pile and a 1 × 4 pile group for both uniform and non-uniform sediments under clear water conditions. The present study aims to evaluate the effects of different sediment beds made up of mixtures of sand and gravel (four-bed configurations) in d50 (1–3.5 mm) and gradation (1.4–3) ranges on scour depth for different flow discharges and flow depths. Further, the findings of the experiments are deployed to describe the effects of pile spacing and flow conditions on the local pier scour for both uniform and non-uniform bed granulometries. In addition, this study addresses the performance of some existing scourdepth predictors. Also, the corresponding results are suitable for validating the numerical models in local pier scour prediction importantly with non-uniform sediments. In summary, the results show that effects of sediment gradation dampen with increasing flow shallowness. Furthermore, the maximum scour depth at pile groups generally increases as pile spacing decreases for uniform sediments, whereas the mentioned trend was not observed for non-uniform sediments for the same flow and sediment conditions. Moreover, the experimental results revealed that bed sediment gradation is a controlling factor in the pile’s scour. Thus, the existing scour depth predictions could be highly improved by considering sediment gradation in the predictions. Finally, the conclusions drawn from this study provide crucial evidence for the protection of bridge foundations not only at the front pile but also at rear piles.
CO2 injection is a well-known Enhanced Oil Recovery (EOR) technique that has been used for years to improve oil extraction from carbonate rock and other oil reservoirs. Optimal functioning of CO2 injection requires a thorough understanding of how this method affects the petrophysical properties of the rocks. We evaluated pore-scale changes in these properties, notably porosity and absolute permeability, following injection of CO2-saturated water in two coquina outcrop samples from the Morro do Chaves Formation in Brazil. The coquinas are close analogues of Presalt oil reservoirs off the coast of southern Brazil. The effects of carbonated water injection were evaluated using a series of experimental and numerical steps before and after coreflooding: cleaning, basic petrophysics, microtomography (microCT) imaging, nuclear magnetic resonance (NMR) analyses, and pore network modeling (PNM). Our study was motivated by an earlier experiment which did not show the development of a wormhole in the center of the sample, with a concomitant increase in permeability of the coquina as often noted in the literature. We instead observed a substantial decrease in the absolute permeability (between 71 and 77%), but with little effect on the porosity and no wormhole formation. While all tests were carried out on both samples, here we present a comprehensive analysis for one of the samples to illustrate changes at the pore network level. Different techniques were used for the pore-scale analyses, including pore network modeling using PoreStudio, and software developed by the authors to enable a statistical analysis of the pore network. Results provided much insight in how injected carbonated water affects the pore network of carbonate rocks.
Environmental conditions play a major role for effects of olive mill wastewater (OMW) application to soil. Choosing a different season for OMW application than the commonly practiced winter, may help avoid negative effects. However, understanding of the OMW-soil interaction during different seasons is still incomplete due to the lack of comparative data. In this study, an 18 months field experiment was carried out in an olive orchard in West Bank. Degree and persistence of soil salinization, acidification, accumulation of phenolic compounds and soil water repellency were investigated as a function of soil depth and time elapsed after OMW application, which was performed either in spring, summer (with and without irrigation) or winter. The persistence of negative effects increased with duration of the hot and dry period following the application due to accumulation and polymerization of OMW. On the other hand, leaching of OMW components to groundwater is favored during the rainy season and by formation of preferential flow paths before the rain season starts. The risks of groundwater contamination and persistent negative effects decrease with increasing time under conditions favoring biological activity. Therefore, OMW application in spring if improved by a careful irrigation is considered as the most suitable under semiarid conditions for clay loam soils.
In this paper simulated rainfall experiments in laboratory were conducted to quantify the effects of patchy distributed Artemisia capillaris on spatial and temporal variations of the Darcy-Weisbach friction coefficient (f). Different intensities of 60, 90, 120, and 150 mm h-1 were applied on a bare plot (CK) and four different patched patterns: a checkerboard pattern (CP), a banded pattern perpendicular to slope direction (BP), a single long strip parallel to slope direction (LP), and a pattern with small patches distributed like the letter ‘X’ (XP). Each plot underwent two sets of experiments, intact plant and root plots (the above-ground parts were removed). Results showed that mean f for A. capillaris patterned treatments was 1.25-13.0 times of that for CK. BP, CP, and XP performed more effectively than LP in increasing hydraulic roughness. The removal of grass shoots significantly reduced f. A negative relationship was found between mean f for the bare plot and rainfall intensity, whereas for grass patterned plots fr (mean f in patterned plots divided by that for CK) increased exponentially with rainfall intensity. The f -Re relation was best fitted by a power function. Soil erosion rate can be well described using f by a power-law relationship.
Trapped or residual air (or gas) is known to affect the multiphase hydraulic properties of both soils and rocks. Trapped air is known to impact many vadose zone hydrologic applications such as infiltration and flow in the capillary fringe, but is also a major issue affecting recoverable oil reserves. Although many studies have focused on the relationship between porosity and trapped gas saturation (Sgt) in sandstones, far fewer studies have been carried out for carbonate rocks. This work aims to analyze the influence of porous media properties on trapped gas saturation in carbonate rocks. For this we used thirteen Indiana Limestone and Silurian dolomite rock samples from the USA, and several coquinas from the Morro do Chaves formation in Brazil. Pore size distributions were obtained for all samples using Nuclear Magnetic Resonance (NMR), and Mercury Injection Capillary Pressure (MICP) data from three of the samples to determine their pore throat size distributions. Additionally, 3D microtomography (microCT) images were used to quantify macropore profiles and pore connectivities. Results indicate a lower capacity of gas trapping in carbonate rocks in which micro- and mesopores predominate. Results also indicate that in carbonate rocks, pore size exerts a greater influence on the ability of gas trapping compared to pore connectivity, so that rocks with a predominance of macropores have greater capacity for gas trapping, even when the macropores are well interconnected. These findings show that pore characteristics very much affect the processes governing gas trapping in carbonate rocks, and indirectly the multiphase hydraulic properties and recoverable oil reserves of carbonate rock reservoirs.
This paper presents the results of an experimental study to quantify the effects of bed slope and relative submergence on incipient motion of sediment under decelerating flows. Experiments were conducted in an experimental tilting-flume of 8 m long 0.4 m wide and 0.6 m deep with glass-walls. Three uniform sediments with median grain sizes of 0.95, 1.8 and 3.8 mm and three bed slopes of 0.0075, 0.0125 and 0.015 were used under decelerating flow. The main conclusion is that the Shields diagram, which is commonly used to evaluate the critical shear stress, is not suitable to predict the critical shear stress under decelerating flows.
Biochars, depending on the types of feedstocks and technological conditions of pyrolysis, can vary significantly in their properties and, therefore, it is difficult to predict biochar-induced effects on nitrous oxide (N2O) emissions from various soils, their physical properties and water availability. The objectives of this study were (1) to quantify effects of slow pyrolysis biochar (BC) and fast pyrolysis biochar (PYRO) on physical and hydro-physical properties of sandy soil (Haplic Arenosol) and clayey loam soil (Gleyic Fluvisol), and (2) to assess corresponding N2O emissions from these two soils. The study included a 63-day long laboratory investigation. Two doses of BC or PYRO (15 t ha–1 and 30 t ha–1) were applied to the soils in combination or without nitrogen fertilizer (NH4NO3, 90 kg N ha–1). The obtained results have shown a significant decrease in the bulk density of sandy soil after it was amended with either rate of BC or PYRO. Water retention capacity of the soils in all the treatments with BC or PYRO increased considerably although no changes was found in the soil water-filled pore space (WFPS) which was higher than 60%. BC was increasing N2O emission rates from the sandy soil treated with N fertilizer, and reducing N2O emission rates from the clayey loam soil treated with N fertilizer. PYRO was more efficient and was reducing N2O emissions from both fertilized soils, but for the sandy soil the reduction was statistically significant only at higher dose (30 t ha–1) of the biochar.