Search

Start Over Subject Geologie. Meteorologie. Klimatologie

9. 10th Czech-Polish Workshop on Recent Geodynamics of the Sudety Mts. and Adjacent Areas Szklarska Poreba, Poland, november 5 - 7, 2009

Creator:
Zdeňka Schenková and Vladimír Schenk
Format:
print, bez média, and svazek
Type:
article, zprávy, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, geodynamika, konference, geodynamics, conferences, Polsko, Poland, 7, and 551
Language:
English
Description:
Zdeňka Schenková and Vladimír Schenk.
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

13. 12th Czech-Polish Workshop on Recent Geodynamics of the Sudety Mts. and Adjacent Areas Jugowice, October 20-22, 2011

Creator:
Zdeňka Schenková and Vladimír Schenk
Format:
print, bez média, and svazek
Type:
article, zprávy, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, geodynamika, konference, geodynamics, conferences, 7, and 551
Language:
English
Description:
Zdeňka Schenková and Vladimír Schenk. and Obsahuje bibliografické odkazy
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

14. 14C and U - series dating of speleothems in the Bohemian Paradise (Czech Republic): retreat rates of sandstone cave walls and implications for cave origin

Creator:
Jiří Bruthans, Jana Schweigstillová, Petr Jenč, Churáčková, Zdeňka, and Petr Bezdička
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, pískovce, jeskyně, stáří, pseudokras, eroze (geologie), holocén, sandstones, caves, old age, pseudokarst, erosion, holocene, speleothems, 7, and 551
Language:
English
Description:
Speleothems in 6 sandstone caves in the Bohemian Paradise (Český ráj) were dated by means of 14C and U-series methods. Stable isotopes of C and O, FAAS, IR, XRD, XRF and SEM were used to characterize the carbonate material and its source. Stable isotopes (C and O) composition of speleothems in two caves corresponds to values characteristic for cave speleothems in Central Europe. In other caves they indicate evaporation and fast carbon dioxide escape during carbonate precipitation. The speleothems from the Krtola Cave were deposited between 8 and 13 kyr BP. Speleothems were deposited 5-8 kyr BP in the Sintrová, Mrtvé Údolí and U Studánky caves. Calcite coatings on smooth sandstone surfaces in studied caves demonstrate that cave walls did not retreat even a few mm in the last 5-8 kyr since speleothem deposition and are thus not evolving under recent climatic conditions. Most of the cave ceilings and walls are at present time indurated by hardened surfaces, which protect the sandstone from erosion. Sandstone caves probably intensively evolved either during or at the end of the Last Glacial period. There are two different erosion mechanisms which might have formed/reshaped the caves at that time: A) In the case of permafrost conditions: Repeated freeze/melt cycles affecting sandstone pore space followed by the transport of fallen sand grains by minor temporary trickles. We expect that heat was transmitted by air circulating between the cave and the surface; B) Seepage erosion of sandstone during the melting of permafrost, prior forming of case hardening., Jiří Bruthans, Jana Schweigstillová, Petr Jenč, Zdeňka Churáčková and Petr Bezdička., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

17. 3-D trend of aseismic creep along active faults in western part of the Gulf of Corinth, Greece

Creator:
Stemberk, Josef and Blahoslav Košťák
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, tektonika, geotectonics, Řecko, Greece, active tectonics, 3-D monitoring, fault movements, The Gulf of Corinth, 7, and 551
Language:
English
Description:
Quaternary faulting in the western part of the Gulf of Corinth has been evidenced by geology and geomorphology, as well as by seismic recording. A series of three main normal fault segments are aligned in a steep southern coastal zone of the gulf. These fault segments, 15 to 25 km long, have an average strike of 90° - 105° and a northward dip of about 50° - 75°. Selected fault points were equipped with 3-D crack gauges TM71 during 2002 to monitor movements along the fault planes here, as well as on another fault cutting through the small island of Trizonia near the opposite northern shore of the gulf. Results of the monitoring present relative displacements induced by active tectonic movement s. Generally, the movements recorded on the faults are characteristic of an aseismic linear creep in vertical, i.e. upliftin g/subsiding in rates of mm per year due to uplifts of the Peloponnesian Peninsula. In 2003 a thr ee months long period of fast acceleration of movements was recorded. During this acceleration phase displacements changed to skew uplifting/subsiding with a left-lateral horizontal component. Moreover, horizontal rotation of monitored blocks corresponding to a sy stematic westwards opening of the Gulf was observed with only single eastward opening episodes., Josef Stemberk and Blahoslav Košťák., and Obsahuje bibliografické odkazy
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

18. 3D how much can we trust some moment tensors or an attempt of seismic moment error estimation

Creator:
Kolář, Petr
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, seizmicita, seismicity, seismic moment tensor inversion, error estimation, seismic moment decomposition, 7, and 551
Language:
English
Description:
During routine processing of selected events of an active KTB experiment it has appeared doubts concerning data reliability and consequently the reliability of results based on them. In the paper 3 events are studied in detail, full seismic moment tensors, as well as their errors, are determined (by non-linear inversion of P/SH waves ratios). It is shown that for the processed low constrained data moment tensor (MT) can be determined, however the relative error is of order of first tens of percent; the results also considerably depend on the way of data picking, used medium model, way of Cost function construction, etc. Any subsequent geophysical interpretation therefore should takes into account this uncertainty. MTs are finally decomposed into DC and non-DC parts, MTs errors are also transformed., Petr Kolář., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

19. 3D monitoring of active fault structures in the Krupnik-Kresna seismic zone, SW Bulgaria

Creator:
Dobrev, Nikolai
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, seizmické oblasti, seismic regions, Bulharsko, Bulgaria, 3D monitoring, active faults, co-seismic displacements, Krupnik-Kresna seismic zone, SW Bulgaria, 7, and 551
Language:
English
Description:
The present paper concerns long-term 3D monitoring of active fault structures in the Krupnik-Kresna seismic zone, SW Bulgaria with the use of extensometers TM71. The purpose is to establish the real rates of fault movements in the most seismically active area in Bulgaria. Three points were installed (B6 on Krupnik Fault, and K5 and K12 on Struma Fault), which indicate a recent activity. The fault movements are characteristic with “calm” periods, linear slips, accelerations and sudden displacements. Different regimes of dynamics have been established corresponding to different periods. The greatest dynamics is found at monitoring point B6 along Krupnik Fault: for the whole period of observation the trends are calculated as left lateral slip with 1.88 mm/a and a thrusting with 1.59 mm/a with high correlation coefficients. Co-seismic displacements from local and distant earthquakes were recorded. The significant impact was from M=7.4, 17 August, 1999, Izmit Earthquake, Turkey, showing a shortening of 8.34 mm, a right-lateral slip of 5.09 mm and a thrusting of 0.96 mm. After that, for a short period of time the regime of movement on fault was changed. Movements on the Struma system reveal lower rates. Both points show left-lateral movements, 0.28 mm/a at K5 and 0.09 mm/a at K12, and thrusting with 0.11 mm/a at K5 and 0.72 mm/a at K12., Nikolai Dobrev., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

20. 3D monitoring of active faults and slope movements in three Bulgarian sites included in cost 625 project

Creator:
Dobrev, Nikolai and Avramova-Tacheva, Elka
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, tenzometrie, svahy, extensometry, slopes (physical geography), fault, slope movement, 3D monitoring, 7, and 551
Language:
English
Description:
The present paper shows the results of 3D monitoring with the use of extensomet ers TM71 performed in Bulgaria in the framework of COST Action 625. This research was performed in selected areas: Simitli graben that is the most seismoactive area in Bulgaria; Madara plat eau - rock scarp with historical monument affe cted by rock toppling; East Rhodopes area - a possibly active fault zone and a large landslide. The most impressive results were established at Simitli graben area with the rate of 2.73 mm/year sinistral movement of Krupnik Fault. Local earthquakes located at NE part of the graben usually influence the movements along this fault. An acceleration of the left latera l movements during calm periods has been established, and respectively, the movements stop (or going in opposite direction) during seismic activity. At Madara site, the results from the 15 years monitoring show subsidence of rock s lices by 0.9 mm per year and si milar rate movement of the slices to South direction. Influence from Izmit earthquake, Vrancea earthquakes and local ones have been established. The monitoring of the fault at General Geshe vo Village, East Rhodopean area started in 2003. The first results show mainly gravitational movements - subsidence of NE block 1.5 mm/year., Nikolai Dobrev and Elka Avramova-Tacheva., and Obsahuje bibliografické odkazy
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

21. 3D monitoring of the selected active tectonic structures in Poland, Italy and Greece

Creator:
Cacoń, Stefan, Kontny, Bernard, and Bosy, Jarosław
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, GPS sítě, GPS netwoks, active tectonics, geodetic monitoring system, local GPS network, crack gauge observation, 7, and 551
Language:
English
Description:
The paper presents the results of geodyn amic research in the fram e of the project COST 625 relating to active tectonic structures’ monitoring on the selected areas in Poland, Italy and Greece. Research was realised using a self-developed control and measurement system. The resu lts of researches for period 2000-2006 indi cate slight movements of observatio n points in the Sudety Mts. reaching several millimetres. However, the results confirm recent mobility of tectonic structures o f this area. Research realised in the Mediterranean Region objects - Gargano, Norcia (Italy) and Kaparelli (Greece) - indicate movements of observation points reaching over a dozen millimetres, particularly on the Gargano area. Continuation of cyclic control measurements on these objects is fully justified ., Stefan Cacoń, Bernard Kontny and Jarosław Bosy., and Obsahuje bibliografické odkazy
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

24. 50 let výuky meteorologie na Vojenské akademii v Brně /

Creator:
Hudec, František,
Type:
text and studie
Subject:
Geologie. Meteorologie. Klimatologie, armáda československá, meteorologie, školy vojenské, Československo 1945-1992, vojenské školství, věda a kultura, polní kuráti, vědy o neživé přírodě, přírodní prostředí, astronomie, and české země od r. 1993 do současnosti
Language:
Czech
Description:
50 years of teaching of meteorology at the Military Academy in Brno.
Rights:
unknown

26. 9, 10-bis(chlormethyl)anthracene - curing agent of coal tar pitch

Creator:
Svítilová, Jaroslava, Machovič, Vladimír, and Kolář, František
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, vytvrzování, curing, coal tar pitch, modification, carbonization, 7, and 551
Language:
English
Description:
Modified coal tar pitch was prepared by Friedel-Crafts reaction with 9,10-bis(chloromethyl)anthracene (BCMA). With the aid of IR and Raman’s spectroscopy it was found that BCMA reacted completely with aromatic components of pitch. This modification leads to a significant increase of the carbonisation residue of coal tar pitch without the structure of carbonisate being greatly affected., Jaroslava Svítilová, Vladimír Machovič and František Kolář., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

28. A comparison of numerical models results with in-situ measurement of ground vibrations caused by sheet pile driving

Creator:
Tomáš Petřík, Eva Hrubešová, and Markéta Lednická
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, numerické modelování, numerical modeling, dynamic analysis, Plaxis 2D, sheet pile driving, vibration velocity amplitude, vibration frequency, vibratory hammer, 7, and 551
Language:
English
Description:
This paper pursues the effect of changes in distance and vibration frequency on the vibration velocity amplitude. As an example, we used the vibrating sheet piles at the cons truction of a new multi-functional FEI building on the premises of VŠB - TU Ostrava, at 17 listopadu street. The effect of these changes is monitored both in in-situ measurements and in a simulated real-life situation. The calculation software Plaxis 2D is used for creation of numer ical models. At the close, the results from in-situ measurements are confronted with those achieved from the models., Tomáš Petřík, Eva Hrubešová and Markéta Lednická., and Obsahuje bibliografické odkazy
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

30. A feasibility of absolute gravity measurements in geodynamics

Creator:
Pálinkáš, Vojtech, Jakub Kostelecký, and Jaroslav Šimek
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, metrologie, nejistota, metrology, uncertainty, hydrological effects, reproducibility, gravity acceleration, absolute gravimeter, FG5, repeatability, 7, and 551
Language:
English
Description:
The absolute gravity measurements are an important tool for reliable monitoring geodynamic phenomena. Based on the experience with the absolute gravimeter FG5#215 (gravimeter of the Center for Earth Dynamics Research), the accuracy of FG5 absolute gravimeters is presented in this study. The instrumental reproducibility of this meter is characterized by the value of 0.7 μGal. Discussed are important environmental effects on gravity measurements, such as atmospheric and hydrological effects, understanding of which is necessary for correct and reliable interpretation of the repeated absolute gravity measurements in geodynamics., Vojtech Pálinkáš, Jakub Kostelecký and Jaroslav Šimek., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

31. A model of rock mass fracturing ahead of the longwall face as a consequence of intensity of exploitation

Creator:
Drzewiecki, Jan and Makówka, Janusz
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, geodynamika, geodynamics, 7, and 551
Language:
English
Description:
In Czech and Polish underground hard coal mines of the Upper Silesian Coal Basin high-energy seismic phenomena are periodically recorded, the sources of which are located ahead of the longwall. Generally, these types of tremors are rooted in very strong, thick layers of sandstone, which are subject to the deformation border. The consequences are discontinuities and cracks with a range depending on the mechanical properties of destroyed rocks: the mechanical parameters of layers. Forecasting methods, developed in the Central Mining Institute, for stress concentration, seismic energy, fault zone and range, together with methods of rock fracturing using liquid or explosives, ,allow precise identification of suitable locations for controlled fracturing of rock mass with a pre-established direction. The size and range of discontinuities have an impact on mining parameters, dependent on basic exploitation intensity and expressed by the average daily progress of the longwall face. The rockmass is locally weakened because of exploitation or technical measures of discontinuities in the roof-rock on the longwall face. To prevent rockburst, measures are needed to reduce the amount of energy accumulating in the rockmass in the area of the longwall face. Knowledge of where stress is concentrated is extremely important for the development and implementation of effective preventative methods. For many years several research centres have been working on defining the range of these areas. In this paper, basic information is presented on methods developed by Central Mining Institute and used in Polish hard coal mines for forecasting energy concentration and assessing how it can be reduced., Jan Drzewiecki and Janusz Makówka., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

32. A new approach for the determination of onset of failure points during laboratory strength testing of rocks

Creator:
Mamurekli, Deniz
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, geodynamika, skály, geodynamics, rocks, pre-failure points, uniaxial tests, load-deformation, 7, and 551
Language:
English
Description:
Estimating the pre- failure points for rocks during laboratory testing is not a trivial task. In this study, a new approach is introduced that utilizes change in the slope of the load-deformation curves of rock in the loading cycle for marking the onset of failure point during uniaxial test of a given rock. At each step, load-deformation data footprints of the rock under test are inspected and a decision is made whether the failure has started or not. The load-deformation data obtained from different tests of different rocks are examined including; Norite, Granite, Limestone, Sandstone, Siltstone and Marble. The computational results over 154 cored rock samples show that the proposed approach locates the onset of failure point for a given rock with an acceptable degree of accuracy., Deniz Mamurekli., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

33. A new generation of multichannel seismic apparatus and its practical application in standalone and array monitoring

Creator:
Brož, milan and Štrunc, Jaroslav
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, seizmicita, seismicity, building, analog-to-digital converter, seismic array, weak event, monitoring network, 7, and 551
Language:
English
Description:
A quantitatively new analog-to-digital converter (ADC) module has been developed during 2010, in co-operation with Tedia Ltd. The module has a 28-bit final resolution and uses 32-bit arithmetic. There are two versions, with four and twelve analog inputs. The 4-input module replaces the original 21-bit version, produced until 2009. The 12-input module is intended to be deployed in small-aperture seismic arrays. The whole set consists of four 3-channel detached modules that can be interconnected with the main module using a cable of up to 100 m in length. This design increases signal-to-noise ratio (SNR) by placing the A/D part as close to the seismograph as possible in order to transmit digital data for storage. All channels are sampled coherently so that all four sensors are automatically synchronised. It allows the detection of local events even though the sync-signal is absent. In other words, the 12-input module is suitable for ad-hoc field measurements even in places where there is no GPS signal. All arrays operated by the Institute of Rock Structure and Mechanics (IRSM) are going to be upgraded to use these modules and some new sites will also be set-up with this innovative equipment (e.g. Lazy in Western Bohemia and Dobrá Voda in Slovakia)., Milan Brož and Jaroslav Štrunc., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

34. A new method of assembling large magnetic blocks from permanent NdFeB magnets

Creator:
Žežulka, Václav and Pavel Straka
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, magnetické obvody, magnetic circuits, magnet assembly, magnetic separation, magnetic filtration, permanent magnets, NdFeB magnets, large magnetic blocks, 7, and 551
Language:
English
Description:
The presented technological procedure makes it possible to assemble large magnetic blocks from permanent magnets with a high value of maximum energy product in such a way that the individual magnets or magnetic plates are moved toward each other at a controlled speed in the direction perpendicular to the future common contact surface of these magnets, i.e. parallel to the induction lines crossing this contact surface. Unlike in the previously used way of assembling the blocks, it is thus possible to eliminate the influence of partial demagnetization as the blocks are being assembled and consequently to reach higher values of magnetic induction in the air gap of the magnetic circuit. When applying the new method of assembling the blocks for instance in circuits of magnetic filters for the purification of ceramic suspensions, a prerequisite for the further improvement of the technological parameters of filtration is thus created., Václav Žežulka and Pavel Straka., and Obsahuje bibliografické odkazy
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

35. A review of the recent seismic activity in the southern part of Egypt (Upper Egypt)

Creator:
Haggag, Hamed Mohamed, Gaber, Hassan Hassib, Sayed, Abdalah Dahy, and Ezzat, Mohamed
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, seizmicita, seismicity, Asuán (Egypt), Aswan (Egypt), seismic energy, Upper Egypt, 7, and 551
Language:
English
Description:
Analyzing the earthquake catalogue of the Upper Egypt area since 1982 revealed some char acteristics of the seismic activity in the area. Construction of a seismicity map according to the seismicity level in the Upper Egypt showed 14 seismic zones and that the seismic activity is intense around the stra it of the Gulf of Suez, along the Red Sea axis, Abu Dabbab and Aswan area. While the detailed study of Aswan zone showed 8 distinct sub-seismic zones and that the activity is concentrated in and around Gable Marawa area. The b-value was calculated for each seismic zone; it is found that the highest value is in Abu Dabbab area followed by Aswan area. A seismic energy rele ased map of the Upper Egypt was constructed for the period from 1982 to 2006; the map reveals the main active zones with high energy values. The study gives new insight for a better understanding of the seismic activity in the Upper Egypt and helps in the seismic hazard assessment., Haggag Hamed Mohamed, Gaber Hassan Hassib, Sayed Abdalah Dahy and Ezzat Mohamed El-Amin., and Obsahuje bibliografické odkazy
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

36. A scheme for the classification of micaceous minerals

Creator:
Karel Melka
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, jílové minerály, clay minerals, macrocrystalline micas, IS ordered structures, ISII ordered structures, fundamental particles, 7, and 551
Language:
English
Description:
The classification scheme for micaceous minerals is described. According to the size of mineral particles micas are divided into macrocrystalline compounds and microcrystalline clay micas. Macroc rystalline micas are differentiated into (a) Mg-Fe-Al micas, (b) Li-micas, (c) micas with other cations. Vertical boundary in the suggested scheme divides micas into trioctahedral and dioctahedral members. Additional subdivision is carried out on the basis of the extent of Si substitution in tetrahedral positions of their crystal lattice. Microcrystalline (<4μm) micas are subordinate to the crystallochemical scheme for macrocrystalline micas. List of mica species together with their varieties and synonyms is in Table 2., Karel Melka., and Obsahuje bibliografické odkazy
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

37. Accuracy of the relative gravity measurement

Creator:
Lederer, Martin
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, geodynamika, geodynamics, accuracy, precision, relative gravimetry, 7, and 551
Language:
English
Description:
Precise relative gravimeters achieve the internal precision about a few μGal 1, even in field conditions. Nevertheless this precision is in fact concerned with the instant of measurement and can not be confused with the accuracy of the gravity at the gravity station, which is influenced by other effects. The best approach of these two values is question of high-quality elimination of instrumental errors and time-variable disturbing effects affecting the relative gravity measurements., Martin Lederer., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

38. Active tectonic fault microdisplacement analyses: a comparison of results from surface and underground monitoring in western Slovakia

Creator:
Briestenský, Miloš, Blahoslav Košťák, Stemberk, Josef, Ľubomír Petro, Jozef Vozár, and Fojtíková, Lucia
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, zemětřesení, jeskyně, tenzometrie, earthquake, caves, extensometry, active faulting, microdisplacements, rock massif dilation, 7, and 551
Language:
English
Description:
This paper examines the results of fault microdisplacement analyses obtained from sites located both at the surface and underground in western Slovakia. The results of surface monitoring showed significant annual climatic effects on the various displacement components. In contrast, the results of underground monitoring in caves showed minimal climatic effects. It is seen that the influence of climate decreases markedly with depth. The yearly peak-to-peak amplitude of climatic variations may be as high as 1 mm at the surface but only 0.1 mm underground. The amount of tectonic displacement can be determined once such climatic considerations have been taken into account. Our fault displacement measurements show horizontal strike-slip rates of tenths of mm or hundredths of mm per year. In addition, vertical displacements have been recorded at Prekážka Quarry, Driny Cave, and Slopy Cave. The network is sufficiently dense to identify changes in displacement activity recorded during recent, significant, earthquake events. Furthermore, three gauges have also helped to determine the local stress orientation in Driny Cave., Miloš Briestenský, Blahoslav Košťák, Josef Stemberk, Ľubomír Petro, Jozef Vozár and Lucia Fojtíková., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

39. Active tectonics in the Eastern Margin of the Bohemian massif: based on the geophysical, geomorphological and GPS data

Creator:
Lubomil Pospíšil, Pavel Roštínský, Otakar Švábenský, Josef Weigel, and Witiska, Michal
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, geodynamika, GPS (navigační systém), geodynamics, GPS (navigation system), active tectonic, morphology, movement tendencies, Waitzendorf and Diendorf faults, 7, and 551
Language:
English
Description:
One of the leaved out fault active systems at Southern Moravian can be considered the so called Diendorf - Čebín tectonic zone (DCTZ), that is seismically active in its southern segment (in Austrian). The Waitzendorf fault is a part of the DCTZ, with intensive morphological signs. The terrain recognizance along the eastern margin of the Dyje Dome confirmed many indi cations showing evidence of geodynamic activity. The facets, old land slides and rock falls indicate recent activity in the environs of Znojmo area. The paper offers interpretation of the geodetic results (GPS) using morphological and geophysical data from all area of the DCTZ ., Lubomil Pospíšil, Pavel Roštínský, Otakar Švábenský, Josef Weigel and Michal Witiska., and Obsahuje bibliografické odkazy
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

42. Adsorbents for iron removal obtained from vermiculite

Creator:
Węgrzyn, Agnieszka, Chmielarz, Lucjan, Zjeżdżalka, Paweł, Andrzej Kowalczyk, Jabłońska, Magdalena, Baldrich Tolosa, Xavier, and Michalik, Marek
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, vermikulit, adsorpce, vermiculite, adsorption, acid treatment, iron removal, 7, and 551
Language:
English
Description:
In presented work, raw, expanded and acid treated vermiculites were used as low-cost and active adsorbents for reducing of environmental pollution with heavy metals. Acid treatment was performed at elevated temperature (95°C) for 2 and 24 h in solution of HNO3. Adsorption capacity towards Fe3+ was studied in column, semi-batch and batch mode. It was shown that all samples are effective in removal of heavy metals; however adsorption mechanism is based not only on ion exchange of interlayer cations but also precipitation/deposition processes. Starting material and modified samples as well as spent adsorbents were characterized with respect to the vermiculite structure using X-ray diffraction method., Agnieszka Węgrzyn, Lucjan Chmielarz, Paweł Zjeżdżalka, Andrzej Kowalczyk, Magdalena Jabłońska, Xavier Baldrich Tolosa and Marek Michalik., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

43. Adsorption of phenol and aniline by original and quaternary ammonium salts-modified montmorillonite

Creator:
Kostelníková, Hana, Petr Praus, and Turicová, Martina
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, adsorpce, montmorillonit, fenoly, anilin, adsorption, montmorillonite, phenols, aniline, intercalation, quaternary ammonium salts, 7, and 551
Language:
English
Description:
Adsorption of phenol and aniline onto original and with quaternary ammonium salts (QASs)-modified montmorillonite was described by sorption isotherms of type III and II, respectively. For the montmorillonite (MMT) modification - hydrophobisation, cetyltrimethyl- ammonium (CTMA) and tetramethylammonium (TMA ) cations were used. In comparison with phenol, aniline was adsorbed largely on original MMT but less on modified one. XRD pa tterns indicated that both aromatic compounds were intercalated in the MMT interlayer be ing perpendicularly oriented to silicate sheets. Alkyl chains of CTMA and TMA probably act as organic "pillars" stabilising the MMT tabular structure against exfoliation due to the intercalation with phenol and aniline of high concentrations., Hana Kostelníková, Petr Praus and Martina Turicová., and Obsahuje bibliografické odkazy
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

44. Adsorptive removal of aromatic compound by montmorillonite: application of factorial design analysis

Creator:
Geyikçi, Feza and Çoruh, Semra
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, montmorillonit, montmorillonite, factorial design analysis, phenol adsorption, 7, and 551
Language:
English
Description:
Phenolic compounds are common pollutants found particularly in the effluents from petroleum and petrochemical, coal conversion, and phenol producing industries. Due to their toxicity and carcinogenity, water and wastewater containing phenolic compounds must be treated before being used and discharged for receiving water bodies. There is a growing interest in using low-cost and commercially available materials for the adsorption of organic compounds. Clay minerals have great potential to remove phenols in water due to efficient sorbents which can be used as alternative adsorbents to replace the costly activated carbon. They are widely applied in many fields of adsorption technology including the removal of amines, metals, ketones, phosphates, chlorophyll, non-ionic contaminants, and organic pigments/dyes. Montmorillonitic smectites, {(Na,Ca)0.33(Al,Mg)2(Si4O10)-(OH)2.nH2O} are one of the natural clay minerals that have specific surface chemical properties. In this study, a factorial experimental design technique was used to investigate the adsorption of phenol from water solution on montmorillonite. Factorial design of experiments is employed to study the effect of three factors: pH (2.0 and 8.0), montmorillonite dosage (0.1 and 1.0 g/L) and initial low and high concentration (10 and 100 mg/L). The efficiency of phenol adsorption was determined after 60 min of treatment. Main effects and interaction effects of three factors were analyzed by using statistical techniques. A regression model was found to fit the experimental data very well. Through using the Student’s t-test, analysis of variance, F-test and lack of fit to define most important process variables affecting the percentage phenol adsorption., Feza Geyikçi and Semra Çoruh., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

45. Aerial photogrammetry observation of the subsidence depression near Karviná

Creator:
Vlastimil Kajzar, Doležalová, Hana, Kamil Souček, and Staš, Lubomír
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, letecká fotogrammetrie, aerial photogrammetry, subsidence depression, monitoring, GNSS, 7, and 551
Language:
English
Description:
Aerial photogrammetry was chosen as an additional observation method of the subsidence depression that was created above exploited coal mining panels near Karviná. While individual points of a permanent observation network were repeatedly surveyed by GNSS, the whole subsidence depression was surveyed by the aerial photogrammetry. As this method was applied three times (during three years) we can compare its results in individual years and observe the major surface changes on the undermined area. Also, a comparison was realized between the points’ coordinates gained from both aerial photogrammetry and GNSS. The results show that the method of aerial photogrammetry enriches and complements the GNSS observation in monitoring the spatial development and shape of the subsidence depression, especially in the areas of active recultivation., Vlastimil Kajzar, Hana Doležalová, Kamil Souček and Lubomír Staš., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

46. Ageing of historical ceramics

Creator:
Vladimír Hanykýř, Koužková, Alexandra, Petr Bouška, and Miroslav Vokáč
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, historická keramika, historical ceramics, irreversible moisture expansion, fired roof tiles, dilatometric measurements, noncrystalline phase, 7, and 551
Language:
English
Description:
Irreversible moisture expansion of specimens made from porous ceramics of historical fired tiles is analysed here. Irreversible moisture expansion values, which reflect the rate of body ageing, were determined by heating at a temperature of 650 °C for 20 minutes and by repeated dilatometric measurement until a te mperature of 700 °C. To evaluate body ageing due to moisture expansion, it is necessary to specify the non-crystalline phase content. The causative factors influencing body ageing can be determined on bodies that have comparable non-crystalline phase content and are of similar chemical and mineralogical composition. Sufficient data set may facilitate a roughestimate of the age of historical ceramics., Vladimír Hanykýř, Alexandra Koužková, Petr Bouška and Miroslav Vokáč., and Obsahuje bibliografické odkazy
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

47. Air lime mortars with incorporation of sepiolite and synthetic zeolite pellets

Creator:
Andrejkovičová, Slávka, Ferraz, Eduardo, Velosa, Ana L., Silva, António S., and Rocha, Fernando
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, vápno, malty, syntetické zeolity, lime, mortar, synthetic zeolites, sepiolite, synthetic zeolite pellets, 7, and 551
Language:
English
Description:
The requirements of conservators who take care of historical monuments are that the materials for rehabilitation of old renders should have a composition as similar to the historical materials as possible and should provide improvement in durability. Fine and coarse sepiolite and synthetic zeolite pellets were chosen as additives in the development of lime mortars for conservation work, due to their unique adsorption properties providing water to the mortar system and acting as water reservoirs in conditions of low humidity. Flexural and compressive strength and the dynamic modulus of elasticity were studied at 28, 90 and 180 days of curing. Addition of both fine and coarse sepiolite and zeolite pellets caused improvement of mechanical strength of mortars, clearly evident at later ages of curing. Elasticity modulus ranged from 2.3 GPa to 3.6 GPa relating to a high deformation capability of mortars and confirming their suitability for use in conservation work., Slávka Andrejkovičová, Eduardo Ferraz, Ana L. Velosa, António S. Silva and Fernando Rocha., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

Limit your search

Show values starting with
more »

Show values starting with
more »

Show values starting with
more »

Show values starting with
more »

Show values starting with
more »

Show values starting with
more »

View distribution

Current results range from 1881 to 2023

View larger »