This paper reports the possibilities of using FTIR spectroscopy and simultaneous thermogravimetry and differential thermal analysis for examination of the structural order of four Czech kaolinite samples (Jimlikov, Sedlec, Olomucany and Unanov deposits) and one kaolinite standard KGa-1b from Georgia deposit obtained from the Source Clays Repository of The Clay Minerals Society (USA). FTIR spectroscopy was used for the classification of the degree of structural order of kaolinite samples by empirical (IR-E) and numerical (IR-N) classification. Differential thermal analysis was used for the determination of the kaolinite disorder degree according to decomposition peak temperature obtained from DTA curves. The resulting trend of decrease in orderliness is: KGA-1b (with the best orderliness) > Jimlikov > Sedlec > Olomucany > Unanov (with the worst orderliness)., Lenka Vaculíková, Eva Plevová, Silvie Vallová and Ivan Koutník., and Obsahuje bibliografii
The character of soil cover in anthropogenically affected areas was determined on the basis of soil morphology, particle size distribution, soil chemical properties, soil organic matter properties and mineralogy of clay fraction. The degree of anthropogenic influence was variable in the individual soil profiles. This is probably the first time that data on hot-wate rextractable carbon distribution in soil profile were obtained from the territory of Prague., Anna Žigová, Martin Šťastný, Jana Krejčová and Pavel Hájek., and Obsahuje bibliografické odkazy
Catalytic test reaction of methylbutynol (MBOH) conversion was applied to investigation of natural clays and non-clay minerals from Jordanian (bentonite, kaolinite, diatomite, zeolit e) and Russian (palygorskite, kaolinite, hydromica) deposits as well as H-ZSM-5. Palygorskite and kaolinite containing samples have shown the highest catalytic activity. Conversionove r Jordanian clay minerals decreased in the order: zeolite > bentonite > red kaolinite > white kaolinite > diatomite that agreed to change of acidity, surface area of samples. Sufficient deactivation was observed for H-ZSM-5, kaolinite and hydromica due to adsorption of secondary product in micropores of raw minerals. Products of both acidic and basic pathways of test reaction were formed indicating the presence of acid and basic sites on clays surface, apart from acidic catalyst H-ZSM-5. Theyield ratio of acidic to basic products was above the unity for zeolite, bentonite, red kaolinite, and palygorskite; equal to unity for diatomite and hydromica, and less then unity for white kaolinite. It was observed for kaolinite containing sample that high activation temperature increased conversion of MBOH owing to fo rmation of additional basic sites as a result of mineral dehydroxylation. Rise of montmorillonite content from 30 to 80 % provided 91-97 % of MBOH conversion., Lyudmila Novikova, Larisa Belchinskaya, Frank Roessner and Murad Alsawalha., and Obsahuje bibliografické odkazy
Magnetotelluric (MT) and audio-magnetotelluric (AMT) methods were applied to clarify the deep geological structure in a coal-mining area in Kushiro, southeastern Hokkaido, Japan. These methods are effective in surveying to deep. Onedimensional inversion was applied to the measurement data obtained in the MT and AMT surveys to estimate the resistivity distributions in the study area. In addition, the one-dimensional inversion method was improved to obtain accurate results by including a smoothing factor and Akaike’s Bayesian information criterion. The inversion method revealed that the lowresistivity zones at depths between 100 and 120 m below sea level correspond with the Yubetsu coal-bearing formation and clay layer, and the thickness of Cretaceous strata was estimated to be more than 4000 m. Finally, the dip of the Osotsunai fault was estimated., Hisafumi Asaue, Misahito Sasahara, Toru Yoshinaga, Yuzo Obara, Kagemi Ushida and Hiroyuki Matsumoto., and Obsahuje bibliografii
The clay deposit of Vila Nova da Rainha (VNR) is included in the lithostratigraphic formation named "Argilas de Tomar", and is located at the lower section of the Tertiary Tagus’ river basin. Clay from one quarry is being extracted for the production of construction ceramics. In this work the firing transformations undergone by VNR clays containing quartz, alkaline feldspar, iron oxy-hydroxides, and clay minerals have been studied. Carbonates have not been identified in these raw materials. The clay layers can be subdivided in three groups based upon composition and ceramic properties. The first group, VNR0, is represented by smectite-kaolinite sandy-silty clay, the second group (VNR1 and VNR2) corresponds to illite-kaolinite bearing clay and the third group (VNR3 and VNR4) is represented by illite-smectite silty clay. The firing process involves the formation of hematite and mullite both influencing the technical properties of the fired products. With regards to the ceramic properties assessed at 1100 ºC the first group showed the lowest total shrinkage value (7.35 %) the highest water absorption value (12.2 %) and the lowest mechanical bending strength value (12.0 MPa); the same properties assessed in the second group provided the highest firing shrinkage values (7.0-5.0 %), the lowest values of water absorption (0.1-0.2 %) and relatively high mechanical bending strength values (47.8-48.0 MPa); the third group showed firing shrinkage values within the range 3.5-4.2 %, water absorption values within the range 1.4-4.5 %, and the highest mechanical bending strength values (49.2-52.0 MPa). The results of the ceramic properties being appraised indicate that the raw materials being studied are suitable for the production of high-quality construction ceramics, such as brick, roof tile and rustic floor tile., João F. Coroado, Eduardo Ferraz, Celso F. Gomes and Fernando Rocha., and Obsahuje bibliografii
By use of plastic or rubber admixtures in the stamped charges, it is possible to affect the properties of tar, in contrast to the calorific value of resulting coking gas; further, it was found that the reactivity- and strength parameters of the obtained blast-furnace coke are good or acceptable. Unused plastics or rubber can economize on part of the coal used in a stamped charge. Additions of both light and heavy plastics can be used up to 5 % of a charge weight; in the case of rubber it is not advisable to exceed 2 wt.-% in a charge. In contradiction to the other methods, which process the unused plastics of up to a content of 1 % in a charge, it is possible, in the case of used stamping method, to process even 2 % or more., Pavel Straka., and Obsahuje bibliografické odkazy
On the basis of laboratory and industrial experiments it was found that rubber can be treated by co-gasification with brown coal, namely in the process of the oxygen-steam pressure gasification in a moving bed (Lurgi gasification process). Considering the very low reactivity of the residual char from rubber, the optimal content of the rubber particles in the mixture being gasified should probably not exceed 10 wt.-%, but short-term increases in the proportion of these particles (up to 20 wt.-%) will not cause technological problems or significant economic losses., Pavel Straka, Vlastimil Kříž and Zdeněk Bučko., and Obsahuje bibliografii
Celestial pole offsets are the displacements between the observed position of the Earth’s spin axis in space and its position predicted by the adopted models of precession and nutation. At present, the models are IAU2006 and IAU 2000, respectively. The celestial pole offsets are regularly measured by Very Long-Baseline Interferometry (VLBI), the observations being coordinated and published by the International VLBI Service for Geodesy and Astrometry (IVS). These offsets contain a mixture of several effects: the unpredictable free term, Free Core Nutation (FCN) that is due to the presence of the outer fluid core of the Earth, forced motions excited by the motions in the atmosphere and oceans, and also imperfections of the adopted precession-nutation models. The geophysical excitations are also available, as determined by several atmospheric and oceanographic services. The aim of this paper is to compare the time series of these integrated excitations with the observed celestial pole offsets and estimate the level of coherence between them., Cyril Ron and Jan Vondrák., and Obsahuje bibliografii
The combination method of results of different space geodetic techniques gives two kinds of products. On the one hand, the Earth orientation parameters (EOP) that define the orientation of the Earth in space and, on the other, the coordinates of collocation stations by them the ITRF is realized. Obtained results are based on the method developed by authors, so called “non-rigorous” combination of the data. Approximately eight-year data was successively processed in order to obtain solutions of both products, which were then compared with the results given in ITRF 2005 solution., Vojtěch Štefka, Jan Kostelecký, and Ivan Pešek., and Obsahuje bibliografii