Search

Start Over Format svazek Date Unknown

312. 35. seminář knihovníků muzeí a galerií při Asociaci muzeí a galerií ČR

Creator:
Anežka Baďurová
Format:
print, bez média, and svazek
Type:
article, zprávy, reports, model:article, and TEXT
Subject:
Historická věda. Pomocné vědy historické. Archivnictví, Asociace muzeí a galerií České republiky, Muzeum Těšínska (Český Těšín, Česko), knihovnictví, historické knihovní fondy, Češi a Poláci, librarianship, historical book collections, Czechs and Poles, 8, and 930
Language:
Czech
Description:
Anežka Baďurová.
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

313. 38. seminář knihovníků muzeí a galerií AMG (2.-4. 9. 2014, Frýdek-Místek)

Creator:
Lenka Veselá-Prudková
Format:
print, bez média, and svazek
Type:
article, zprávy, reports, model:article, and TEXT
Subject:
Historická věda. Pomocné vědy historické. Archivnictví, Asociace muzeí a galerií České republiky, knihověda, historické knihovní fondy, knihovníci, bibliology, historical book collections, librarians, 8, and 930
Language:
Czech
Description:
Lenka Veselá.
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

314. 3D how much can we trust some moment tensors or an attempt of seismic moment error estimation

Creator:
Kolář, Petr
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, seizmicita, seismicity, seismic moment tensor inversion, error estimation, seismic moment decomposition, 7, and 551
Language:
English
Description:
During routine processing of selected events of an active KTB experiment it has appeared doubts concerning data reliability and consequently the reliability of results based on them. In the paper 3 events are studied in detail, full seismic moment tensors, as well as their errors, are determined (by non-linear inversion of P/SH waves ratios). It is shown that for the processed low constrained data moment tensor (MT) can be determined, however the relative error is of order of first tens of percent; the results also considerably depend on the way of data picking, used medium model, way of Cost function construction, etc. Any subsequent geophysical interpretation therefore should takes into account this uncertainty. MTs are finally decomposed into DC and non-DC parts, MTs errors are also transformed., Petr Kolář., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

315. 3D monitoring of active fault structures in the Krupnik-Kresna seismic zone, SW Bulgaria

Creator:
Dobrev, Nikolai
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, seizmické oblasti, seismic regions, Bulharsko, Bulgaria, 3D monitoring, active faults, co-seismic displacements, Krupnik-Kresna seismic zone, SW Bulgaria, 7, and 551
Language:
English
Description:
The present paper concerns long-term 3D monitoring of active fault structures in the Krupnik-Kresna seismic zone, SW Bulgaria with the use of extensometers TM71. The purpose is to establish the real rates of fault movements in the most seismically active area in Bulgaria. Three points were installed (B6 on Krupnik Fault, and K5 and K12 on Struma Fault), which indicate a recent activity. The fault movements are characteristic with “calm” periods, linear slips, accelerations and sudden displacements. Different regimes of dynamics have been established corresponding to different periods. The greatest dynamics is found at monitoring point B6 along Krupnik Fault: for the whole period of observation the trends are calculated as left lateral slip with 1.88 mm/a and a thrusting with 1.59 mm/a with high correlation coefficients. Co-seismic displacements from local and distant earthquakes were recorded. The significant impact was from M=7.4, 17 August, 1999, Izmit Earthquake, Turkey, showing a shortening of 8.34 mm, a right-lateral slip of 5.09 mm and a thrusting of 0.96 mm. After that, for a short period of time the regime of movement on fault was changed. Movements on the Struma system reveal lower rates. Both points show left-lateral movements, 0.28 mm/a at K5 and 0.09 mm/a at K12, and thrusting with 0.11 mm/a at K5 and 0.72 mm/a at K12., Nikolai Dobrev., and Obsahuje bibliografii
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

316. 3D monitoring of active faults and slope movements in three Bulgarian sites included in cost 625 project

Creator:
Dobrev, Nikolai and Avramova-Tacheva, Elka
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, tenzometrie, svahy, extensometry, slopes (physical geography), fault, slope movement, 3D monitoring, 7, and 551
Language:
English
Description:
The present paper shows the results of 3D monitoring with the use of extensomet ers TM71 performed in Bulgaria in the framework of COST Action 625. This research was performed in selected areas: Simitli graben that is the most seismoactive area in Bulgaria; Madara plat eau - rock scarp with historical monument affe cted by rock toppling; East Rhodopes area - a possibly active fault zone and a large landslide. The most impressive results were established at Simitli graben area with the rate of 2.73 mm/year sinistral movement of Krupnik Fault. Local earthquakes located at NE part of the graben usually influence the movements along this fault. An acceleration of the left latera l movements during calm periods has been established, and respectively, the movements stop (or going in opposite direction) during seismic activity. At Madara site, the results from the 15 years monitoring show subsidence of rock s lices by 0.9 mm per year and si milar rate movement of the slices to South direction. Influence from Izmit earthquake, Vrancea earthquakes and local ones have been established. The monitoring of the fault at General Geshe vo Village, East Rhodopean area started in 2003. The first results show mainly gravitational movements - subsidence of NE block 1.5 mm/year., Nikolai Dobrev and Elka Avramova-Tacheva., and Obsahuje bibliografické odkazy
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

317. 3D monitoring of the selected active tectonic structures in Poland, Italy and Greece

Creator:
Cacoń, Stefan, Kontny, Bernard, and Bosy, Jarosław
Format:
print, bez média, and svazek
Type:
article, články, model:article, and TEXT
Subject:
Geologie. Meteorologie. Klimatologie, GPS sítě, GPS netwoks, active tectonics, geodetic monitoring system, local GPS network, crack gauge observation, 7, and 551
Language:
English
Description:
The paper presents the results of geodyn amic research in the fram e of the project COST 625 relating to active tectonic structures’ monitoring on the selected areas in Poland, Italy and Greece. Research was realised using a self-developed control and measurement system. The resu lts of researches for period 2000-2006 indi cate slight movements of observatio n points in the Sudety Mts. reaching several millimetres. However, the results confirm recent mobility of tectonic structures o f this area. Research realised in the Mediterranean Region objects - Gargano, Norcia (Italy) and Kaparelli (Greece) - indicate movements of observation points reaching over a dozen millimetres, particularly on the Gargano area. Continuation of cyclic control measurements on these objects is fully justified ., Stefan Cacoń, Bernard Kontny and Jarosław Bosy., and Obsahuje bibliografické odkazy
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

318. 3D numerical model of the spherical particle saltation in a channel with a rough fixed bed

Creator:
Lukerchenko, Nikolay, Piatsevich, Siarhei, Chára, Zdeněk, and Vlasák, Pavel
Format:
bez média and svazek
Type:
model:article and TEXT
Subject:
3D saltation model, bed-load transport, particle-bed collision, particle rotation, particle lateral dispersion, 3D model saltace, pohyb splavenin, kolise částice-dno, rotace částic, and příčná disperze částic
Language:
Slovak
Description:
The paper describes a 3D numerical model of the spherical particle saltation. Two stages of particle saltation were distinguished - the particle free motion in water and the particle-bed collision. The particle motion consists of the translational and rotational particle motion. A stochastic method of calculation of the particle-bed collision was developed. The collision height and the contact point were defined as random variables. Impulse equations were used and the translational and angular velocity components of the moving particle immediately after the collision were expressed as functions of the velocity components just before the collision. The dimensionless coefficients of the drag force and drag torque were determined as functions of both translational and rotational Reynolds numbers. The model is in good agreement with known experimental data. Examples of calculation of the particles’ lateral dispersion and the mean absolute values of the deviation angle of the particle trajectory are presented. and Studie popisuje 3D numerický model saltačního pohybu kulovité částice, v němž jsou uvažována dvě fáze saltačního pohybu - volný pohyb částice v proudící vodě a kolise částice se dnem. Model počítá s translačním i rotačním pohybem částice. Byla vyvinuta stochastická metoda výpočtu kolise částice se dnem. Kolizní výška a kontaktní bod byly definovány jako náhodné proměnné. Byla použita soustava momentových rovnic a složky translační a rotační rychlosti pohybující se částice po kolizi byly vyjádřeny jako funkce složek rychlosti těsně před kolizí. Bezrozměrné koeficienty odporu částice a odporu rotující částice byly určeny jako funkce translačního i rotačního Reynoldsova čísla částice. Výsledky modelu jsou v dobré shodě se známými experimentálními daty. Studie presentuje příklady výpočtu příčné disperze částice a střední absolutní hodnoty deviačního úhlu trajektorie částice.
Rights:
http://creativecommons.org/licenses/by-nc-sa/4.0/ and policy:public

319. 3D object recognition using octree model and fast search algorithm

Creator:
Lee, Young Jae, Abraham , Ajith, and Kim , Dong Hwa
Format:
bez média and svazek
Type:
model:article and TEXT
Subject:
3D object recognition, octree model, and pattern analysis
Language:
English
Description:
This paper presents a new approach to 3D object recognition by using an Octree model library (OML) I, II and fast search algorithm. The fast search algorithm is used for finding the 4 pairs of feature points to estimate the viewing direction uses on effective two level database. The method is based on matching the object contour to the reference occluded shapes of 49, 118 viewing directions. The initially bestmatched viewing direction is calibrated by searching for the 4 pairs of feature points between the input image and the image projected along the estimated viewing direction. At this point, the input shape is recognized by matching it to the projected shape. The computational complexity of the proposed method is shown to be O(n^2) in the worst case, and that of the simple combinatorial method of O(m^4,n^2), where n and m denote the number of feature points of the 3D model object and the 2D object, respectively.
Rights:
http://creativecommons.org/publicdomain/mark/1.0/ and policy:public

Limit your search

Show values starting with
more »

Show values starting with
more »

Show values starting with
more »

Show values starting with
more »

Show values starting with
more »

Show values starting with
more »